Available in: 4L
N’STAT 64 Disinfectant / No-Rinse Sanitizer
N’Stat 64 is a multi-purpose food grade quaternary (quat) germicide and deodorant designed for use in hospitals, nursing homes, schools, restaurants, beverage plants, breweries, poultry farms and anywhere that good disinfection and sanitation procedures are of importance. N'Stat 64 is approved for use on food contact surfaces as a no-rinse sanitizer at 200 ppm quat concentration
- Active against a wide range of bacteria, viruses and fungi
- Concentrated product that dilutes 1:64 for disinfection
- Dilutes 1:192 for sanitization, to provide a 200 ppm quat solution.
- Approved for use on food contact surfaces as a no-rinse sanitizer at 200 ppm quat
Directions for Use
Surfaces must be pre-cleaned prior to the use of this product (and for other disinfectants) For disinfection dilute 1:64 with water (15.6 ml per liter) and apply solution to surface with a mop, sponge, cloth or as a spray. Allow the surface to remain wet for a minimum of 10 minutes contact time and then wipe dry. At 1:64 dilution, food contact surfaces must be rinsed with potable water. For sanitization dilute 1:192 with water (5.2 ml per liter) and apply solution to surface with a mop, sponge, cloth, as a spray or by soaking. Allow the surface to remain wet for a minimum of 1 minute contact time and then drain and air dry - do not rinse.
This product is for professional use only. Before using this product read the product label and Safety Data Sheet.
Appearance : Clear red liquid
Viscosity : Water like
Density : 1.0
pH : 5.5 – 6.5
N’Stat 64 is registered with Health Canada as a hard surface disinfectant